Hi - my headphone jack is broken. I took the iPod apart and the headphone jack is soldered to board. Any idea how to replace it? I found a replacement part online but dont know how to use it. My model number is M8740LL/A. Thanks
Es esta una buena pregunta?
Rep: 782.1mil
1.1mil
893
2.3mil
You can try and solder it yourself after you practice on some other components until you become proficient, or you could just take it to your local TV/Radio repair person and have them solder it. Remember that what makes these guys usually expensive is to dismantle and diagnose, which is time consuming. In your case, it's disassembled and should be straight forward. Also, do not forget your local High School and Colleges, check for their electronics courses, if you do not a TV repair person handy. They are almost as hard to find as parts for your iPod. ;-) Kit de habilidades electrónicas 101 and http://www.aaroncake.net/electronics/sol... might be a good start....good luck
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 1
Todo El Tiempo: 681
2 comentarios
I have the same problem, please pass on the details of the replacement headphone jack so I can order one myself- thanks!
- de Steve
Can you please post what the replacement part is? I've looked everywhere!
- de Steve