Saltar al contenido principal

Repair information for Whirlpool dishwashers.

Preguntas 156 Ver todo

Whirlpool dishwasher won't wash in normal dry mode

Brand: Whirlpool

Model Number: WDF750SAYM

The dishwasher would not wash under most circumstances. The water fills up and is drained properly, but the wash cycle would only work when drying is set to “Eco” mode. Washing (when drying is set to Eco) works for both 1 hour wash and normal wash. What I’ve already tried:

  • turn off power for a while, then back on
  • Diagnostics returns 7-1, also returns 8-1 intermittently
  • I’ve cleaned the spray arms and drain components, they’re working fine

Wet dishes aren’t great, it would be great to get this working under “Heated” drying mode. Got any ideas on things to try?

Thanks.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Respuesta Más Útil

Hi @londonbao ,

A 7-1 error code is a heater or heater circuit problem.

Disconnect the power from the dishwasher and check the resistance (between 8Ω and 30Ω) of the dishwasher heater element, part #1 heater parts diagram.

If the heater element is OK you will have to check the heater element’s power supply circuit as shown in the tech sheet for the dishwasher.

It also lists all the diagnostic fault codes and their likely causes.

The supplier linked above was only to show the the location of the part and how much it may cost. There are other suppliers online that may suit you better. Just search for WDF750SAYM0 parts to get results

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Kin Chung estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 12

Todo El Tiempo: 762