Repara tus cosas Comunidad Tienda

Información de reparación de los auriculares inalámbricos SteelSeries Arctis Pro. Lanzado en marzo de 2018. Número de modelo: 61743.

Preguntas 58 Ver todo

Opciones

The Line out on my transmitter has stopped working.

I’ve had my speakers connected to the line out of the wireless transmitter since I bought it. However, there is no longer any signal coming from the line out. I have tested that the speakers still work and connected another device to the line out but that doesn’t work either, so it has to be an issue with the line out. I have tried resetting the transmitter in case it is a software issue but still cannot get audio from the line out. Has anybody had this issue and have a fix?

Many thanks

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 2
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

Had a similar issue, in my case it was ‘user error’. I use the base station on laptop and desktop and it gets moved around alot, at some point the desktop (win10) had switched ‘default sound output’ to the “…Wireless Chat” device instead of the “…Wireless Game” Device.

Apparently only the “…Wireless Game” Device gets forwarded to the Line out.

NB My desktop is connected via USB to the base station.

Fue útil esta respuesta?

Sí No
Puntuación 2
Agregar un comentario

Opciones

So I have been having this same issue for months now. My solution originally was to just unplug the speakers from the line out, and just manually switch between the two, but upon having some sound issues’ this weekend where my sound was going in and out, I decided to try some troubleshooting to figure out if I could fix the original issue of the line out on the receiver. I went through everything I could think of, and the problem ended up being the USB port that I was plugged into. I cleaned my desk months back, and must of plugged the receiver into a USB 2.0 slot on accident, so if you haven’t already try changing the USB slot to make sure you are plugged into a 3.0.

TLDR - try changing USB slots on your PC

Fue útil esta respuesta?

Sí No
Puntuación 2
Agregar un comentario

Opciones

I just ran into the same thing. I went into the menu on the transmitter and did a reset, and then set the source back to my PC. After that, it seems to work again.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

Made an account here just so I could chime in thanks to Mike because the transmitter reset worked for me.

- de

Agregar un comentario

Añadir tu respuesta

Lewis Perkins estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 15

Ultimos 30 días: 81

Todo El Tiempo: 5,548