Saltar al contenido principal

Tercera generación de iPad con Wi-Fi, lanzado el 16 de marzo de 2012. Número de modelo A1416. La reparación requiere calentamiento y palanca cuidadosa.

Preguntas 155 Ver todo

My iPad 3 Lcd does not work after I snapped it in half

Ok, ok, I know it seems like a stupid question, but hear me out. So I bought an iPad 3 with a shattered digitizer but otherwise good lcd off of eBay. It wasn't ic locked, yay! So I set away at repairing it. However, the digitizer was broken into many pieces, and when I went to lift the LCD out of the iPad, some pieces of still-stuck digitizer pressured it and it got a diagonal crack. At this point half of the LCD still worked. Later on I plugged the iPad back on and the LCD gave no signs of life. iTunes doesn't work because it has a passocde either. Should I just get a new LCD or is the problem something else entirely?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Respuesta Más Útil

@ameteur_repair there are never any guarantees but at this point my suggestion is to change the LCD/Digitizer and then re-evaluate. From what you are describing a new LCD should repair this.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Anonymous estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 20