Rep: 23
1
As you can see in the photo, the battery connector on the logic board was damaged during disassembly. The edge of the plastic connecter and clip, red arrows, were broken during removal. Anyone have any suggestions on a fix for this problem? The socket is still connected to the logic board, but the plastic retaining clip is damaged.
Appreciate any advice.
Es esta una buena pregunta?
Rep: 480.3mil
35
330
971
Here’s one source for the part FF14A-6C-R11DL-B-3H It’s the same connecter!
I would recommend you find someone with the correct tools and micro soldering skills as this needs special care to remove the old part and install the new one without killing the logic board.
Fue útil esta respuesta?
Rep: 1
4
1
My suggestion is go to a microsoldering tenician to get that fixed… If you try to do it your self it might caused more damaged. Good luck.
Fue útil esta respuesta?
Any ideas where to source that part?
@Brooks Hill
Dan provided the source for the connector. Unless you really professional with micro soldering skill I would suggest you to just go to yelp and search micro soldering near you, many will give you free quota for price estimate and you can compare the shops based on their reputation and price to decide which one you are going for. Good luck.
Ultimas 24 horas: 1
Ultimos 7 días: 7
Ultimos 30 días: 11
Todo El Tiempo: 315
1 comentario
i have the same problem except my connector is actually broken off the motherboard, i can still stick the ribbon cable in but the power isnt registering, and now i have a brand new battery but have to keep it plugged in at all times while im using it, doesn anyone have any tips?
- de Mel Bennett