Repara tus cosas Comunidad Tienda

El Pixel de tercera generación lanzado por Google en octubre de 2018.

Preguntas 104 Ver todo

Opciones

No longer charges wirelessly after replacing usb port + battery

After changing the battery and charging assembly, I can now charge my phone with the USB port normally, but the wireless charging no longer works.

I am not sure what connection to check.

Are there any good troubleshooting steps for this?

Update (11/24/2020)

I'm going to guess the issue is that one of my contacts broke off. Here is a picture (not my phone):

https://imgur.com/a/62B2xOF

The yellow part is missing on mine... yikes...

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

What I ended up doing in the end is soldering a little wire to the pad circled in the question, then bent the wire into an ‘S’ shape so it was about the height of the intact yellow things on the other pads.

When I put the wireless charging coil assembly back on, I made sure to press it straight down, so the little ‘S’ wire I made would not bend to the side and contact the other pads.

It was easy enough to do with a fine-tip soldering iron and needle-point tweezers.

Thank you oldturkey03, you were right!

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario
Respuesta Más Útil

Opciones

@bernvaug yes that is most certainly a reason for it not to work. Try to solder a jumper wire directly to the battery. See if that we’ll resolve it

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

Thanks for the idea, I've ordered some solder; I didn't realize I had run out.

I'll give an update on if and how soldering fixes it, when I get to that point.

- de

Agregar un comentario

Añadir tu respuesta

Vaughn estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 5

Todo El Tiempo: 104