Repara tus cosas Comunidad Tienda

La única version con Wi-Fi del Apple iPad 6, lanzada en marzo de 2018. Disponible con 32 y 128 GB de almacenamiento. Dispone de una pantalla Retina de 9.7 pulgadas y de un chip de fusión de 64 bits A10.

Preguntas 150 Ver todo

Opciones

iPad 6th gen (2018) hissing with screen on

Hi all.

So, i’ve got an iPad 2018, that’s got a “funny” issue. The iPad is hissing whenever the screen is turned on - no sound when turned off. I thought at first it had something to do with the battery and replaced that, no effect - then i tried the LCD-panel to no avail. I’ve further taken the iPad apart and inspected the mainboard itself under a microscope. Nothing looks off - and i’ve isolated the sound to one component. I do MB repairs, but never come across this issue. I’ve desoldered and reflown and soldered back on, it still hisses so my guess is that it’s defective. Now, my question is, i need to identify the IC so i can get a new, as i don’t have a donor-board at hand. Can anyone help me?

I’ve attached pictures of the board, and of the component location on the board, i hope it can give something - thanks in advance :)

Block Image

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

All this troubleshooting is probably futile, as this probably isn’t a problem to begin with.

This is called inductor whine, present in many products. It’s not a malfunction if the device otherwise works normally.

Fue útil esta respuesta?

Sí No
Puntuación 2

2 comentarios:

This is not normal conductor whine - it's enrirely too loud, it sounds like I've got tinnitus, bad case if it at that and is enough to give a headache just looking at it - and it's really up to my customer to decide whether or not he wants it fixed, I'm just asking for clues which i guess is the point of this forum - so im afraid your reply is not helpful at all, as my customer wants to discard the unit, unless it's fixed..

- de

Pointing out the economics or pragmatics of the repair sometimes does more than trying to fix any problem. Also this site is more like a DIY level repair site, professional repairs are not un-welcomed, but probably out of scope anyway.

I think I've seen a board diagram somewhere, but it's too late for me today.

- de

Agregar un comentario

Añadir tu respuesta

Mikkel Øgendahl estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 123