Rep: 55
3
Various videos online show people just prying the back of the phone off with a spudger. I assumed I would need to use a heat gun or iopener or something similar to melt the adhesive first? Just want to make sure I do this right
Es esta una buena pregunta?
Rep: 289
4
I’d highly recommend it, since it not only makes the separation of the screen easier, but also prevents the breaking of the screen an other components from using too much force.
Word of caution: Whether you use a heat gun or a hair dryer, keep the heat moving along the edges and not stationary on one spot, as it can cause damage to the screen and other parts of the phone. If you have an iOpener, place it for a few seconds on the edges of the device every few seconds. This also should help opening the device with more ease.
Hope that helps.
Fue útil esta respuesta?
WRONG! Please see Smilzos answer, next. Thank you Smilzos. * I too have sought a guide, and for some time.
Rep: 11.2mil
43
9
11
hello, it does not require a heat gun, the back is only interlocking. I just wrote a guide if you want to check. regards
Fue útil esta respuesta?
Thank you Smilzos. * I too have sought a guide, and for some time.
Ultimas 24 horas: 0
Ultimos 7 días: 1
Ultimos 30 días: 14
Todo El Tiempo: 1,436
