Saltar al contenido principal

A1706 / EMC 3071: lanzado en noviembre de 2016, este Macbook Pro de 13 "presenta la barra táctil OLED. Cuenta con una CPU Intel Core i5 de doble núcleo" Skylake "y cuatro puertos Thunderbolt 3.

Preguntas 204 Ver todo

Some tiny pieces fell of from my MB

Hi,Some tiny piece fell off from the logic board. 1 black IC and three silver capacitor I think! Can be fixed or not!!

Block Image

I think it's “ zdw1 6af s019 “

It's turn on with max fan speed and very laggi (unusable)

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

It can be fixed but will require someone with a surface-mount soldering station. A good repair house should be able to do it.

Did something happen to make these parts come loose?

Update (09/26/2020)

The orientation of the chip should be marked on the chip and the board. The other components will be hit and miss. I would definitely price out a replacement motherboard and compare it to a probable pricey repair.

Fue útil esta respuesta?

Puntuación 0

Comentarios:

@crowbot This happened after opening the laptop, and I'm not even sure what part this IC is for! And I do not know the capacitors is for which part, do I need to change the motherboard (logic board)?

- de

Agregar un comentario

Hopefully you have all of the pieces! Yes, these can be resoldered to the logic board by someone with the proper skills and tools. This is beyond what a DIY can do as the tools needs are specialized and you need access to the schematics and boardview drawings.

How did they come off is also important! I’m suspecting you poked too deep with your tools to pop the bottom cover off. You may have caused other damage and the one or more of the parts could be damaged as well.

Fue útil esta respuesta?

Puntuación 0

Comentarios:

This happened after opening the laptop, and I'm not even sure what part this IC is for! And I do not know the capacitors is for which part, do I need to change the motherboard (logic board)?

- de

You need to get them put back! But just like a jigsaw puzzle there is direction and placement issues! You just can't put the parts any which way! You need the proper tools and the documentation to guide you (Schematics and boardview drawings).

Your other solution is much more costly! Thats replacing the logic board completely!

- de

Agregar un comentario

Añadir tu respuesta

Bl4ck 4lien estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 51