Saltar al contenido principal

Versión actualizada del iPad 2 original, lanzado en marzo de 2012 con un procesador de troquel más pequeño y una construcción interna actualizada. La reparación requerirá el uso de calor y palanca cuidadosa.

Preguntas 73 Ver todo

How to stop an unwanted power off post battery install?

Immediately post new battery replacement the unit starts up and operates perfectly except it will shut off every three minutes no matter what.

I have tried resetting all of the settings back to original, I have also wiped the iPad and started from scratch. None of these seems to help.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Good afternoon Mark!

I have had this exact same thing happen to me on an iPad 6. I had isolated the battery through the repair and when reassembled it would not pull amps with the screen off and would restart every 2-3 minutes. I took it back apart and removed the motherboard to inspect the battery connections. To my surprise, there was a small spec of dust preventing one of the contacts on the board from getting good connection. Removed said dust, reassembled, and the device has been working ever since. I cannot guarantee this is your issue, but it fixed the one that I had!

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

mark hilbert estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 6

Ultimos 30 días: 9

Todo El Tiempo: 50