Saltar al contenido principal

El reloj inteligente de quinta generación de Apple, con conectividad celular opcional, lanzado el 20 de septiembre de 2019.

Preguntas 48 Ver todo

Display without digitizer stays black

I recently bought a series 5 with broken display glass. I was able to separate the broken glass and digitizer from the display succesfully.

At first I thought the display was broken after the separation since it stayed black. But at some point the battery died and suddenly the display showed the following image:

Block Image

After charging for a while, the watch turned on and went into black screen again and stayed black.

I am currently waiting for the replacement digitizer to arrive, but I assume the series 5 is showing a black screen, when no digitizer is connected.

Can anyone confirm this behaviour?

Thanks

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1

1 comentario:

Did you ever figure this out?

I have a friend who has a series 5 that works fine, but the screen has two scratches.

How hard was it to separate the digitizer from the LCD?

- de

Agregar un comentario

5 Respuestas

If this is happening, there is either something stuck in the screen connector, the LCD cables are damaged, or one of the pins on the screen is bent out of place.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

My Apple Watch 5 was working fine. I took it off to take a bath and when I went to put it on my arm the display was black and showed the time only. I shows a red low battery but it was fully charged before. Any suggestions?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Hi, I have the same problem. Did the new digitizer help?

Fue útil esta respuesta?

Puntuación 0

1 comentario:

Did you finalize fixed the display? Or just replaced entirely by a new one?

- de

Agregar un comentario

Hi Franqus, I am having the same problem. Removed the glass (and by accident the digitizer) and now there is no image....

Did you manage to revive your Oled display?

Thank you

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Same as @lucianolavigne . I stripped a part of the cable that connects the digitizer so I need to replace it. Can anyone confirm if the display should at least turn on if I remove the digitizer? I just want to see if it is working before doing/buying anything else.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

franqus estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 806