Saltar al contenido principal

Lanzado el 26 de octubre de 2018. Modelos A1984, A2105, A2106, A2108. Disponible como GSM o CDMA / eSIM, nano-SIM o dual-SIM / 64, 128 o 256 GB / negro, blanco, azul, amarillo, coral o rojo. (Pronunciado "iPhone 10 R.")

Preguntas 468 Ver todo

Part of display is dim after heat exposure

I have replaced the lcd on an iPhone. After following this guide on ifixit’s youtube channel.

https://youtu.be/9do-yk2OCoM

It is shown that after applying the adhesive gasket you should apply heat and even weight. After doing so the lower left corner of the lcd was dimmed. I put the phone in the freezer and then the display looked fine. When it warmed up the display got dim again. Please help.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

It sounds like you may have damaged the LCD when applying heat to the phone. What were you using to heat the screen, and did it even get too hot to touch?

Fue útil esta respuesta?

Puntuación 0

1 comentario:

I used a heat gun. It wasn’t that hot, I could touch it.

- de

Agregar un comentario

Añadir tu respuesta

Matevz stih estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 27