Rep: 1
1
Hi guys,
I am looking for a tool (or the best work-around) for opening the screws of the iMac G4 silver neck. I have opened it before with screwdrivers and bits, but it was a real pain and I would love a solid tool for doing it again.
Thank you,
Lucas
Es esta una buena pregunta?
Rep: 479.6mil
35
329
971
Apple doesn’t offer the sub components that makes up the neck. Here’s one source for the needed part:
Fue útil esta respuesta?
Thanks, but I don't need a replacement part, I just need a tool to open the neck with...
In that case you'll need to make a custom tool. A piece of brass rod should do it drill the three holes into the brass rod (handle) and using some steel pins of the correct diameter press fitted should do the trick.
Ultimas 24 horas: 1
Ultimos 7 días: 5
Ultimos 30 días: 10
Todo El Tiempo: 366
@lucaswars2 - What are you trying to do?
I don't remember needing to take the neck apart for any repairs.
- de Dan
@danj It’s not traveling smoothly anymore and I’m trying to see if I can clean the inside up a bit or put a new plastic bracket in to make it smoother...
- de Lucas