Saltar al contenido principal

Sexta generación del iPad, lanzado en marzo de 2018. Disponible en Wi-Fi y LTE con opciones de almacenamiento de 32 y 128 GB. Cuenta con una pantalla Retina de 9.7 "y un chip de fusión A10 de 64 bits.

Preguntas 187 Ver todo

Why did the touch/digitizer function randomly stop working?

Customer brought in an iPad 6 (A1893)

The digitizer no longer functions at any capacity.

It is a company iPad, so it is in pristine condition.

Factory resetting device hasn’t worked.

I removed the screen- unsurprisingly, an OEM lens.

No signs of liquid exposure internally- again, pristine.

No visible connector obstructions.

I have tried TWO replacement digitizers to no success.

Board issue?

maybe its the touch disease curse of Apple 6th generation products?? /s

Any further insight would be greatly appreciated.


Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Hi Steve B,

Hold down the circular Home button and the On/Off (Sleep/Wake) button at the same time for around 10 seconds. This will restart the device and should restore the screen to full working order.

Hope this helps,

Sincerely, Onlaf

Fue útil esta respuesta?

Puntuación 0

1 comentario:

thanks for the response Onlaf. attempting the soft reset, you speak of, was something we’ve tried from the beginning. we just received our third screen assembly(from varying vendors, at that) still no success in regards to the digitizer function yet the LCD has functioned fine with each replacement we’ve tried. the flex connectors visibly appear fine. even the solder connection on the board side looks fine. i’m assuming an underlying board issue but just throwing it out to the community to ensure there isn’t another approach i could take in resolving this .

thanks again,


- de

Agregar un comentario

Añadir tu respuesta

Steve B estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 38