Saltar al contenido principal

Lanzamiento el 21 de septiembre de 2018. Modelos A1920, A2097, A2098, A2100. Disponible como GSM o CDMA/eSIM o nano-SIM/64, 256, o 512 GB/ Plateado, Dorado o Gris Espacial (Pronunciado "iPhone 10 S.")

Preguntas 375 Ver todo

No SIM Card Error

I replaced a customer’s shattered back glass/frame and screen. Everything works except there’s a weird issue when I push the after market screen all the way into the frame the phone says “No SIM CARD installed”….when I lift the screen back up the service come back as normal. . The original screen doesn’t have this issue. I tried multiple aftermarket, same issue. what could cause this??

Some extra info I had another customer come to me with this issue after screen replacement at another business. I replaced her screen and the issue was still there, she claims she put a rubber band in the SIM slot and it works perfect now. Oddly Both AT&T service. I’ve used this same aftermarket on XS max phones many times but these 2 phones have the issue

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Respuesta Más Útil

It sounds like something is shorting out when the screen is put into place, I would say take a look in the phone and see if there is any metal on metal contact between the screen and the SIM tray and possibly try and cover it with some tape or another insulator.

Hope this helps!

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Block Image

I have this issue after replacing my entire midframe(“ battery housing “) i pried up on the grounds that make contact with the screen they follow around where the screen would sit flat and I didn’t have this issue again. I circled where they make contact on the screen

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Brittany estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 484