Saltar al contenido principal

iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben ser reemplazados como una unidad. GSM / 8, 16, o 32 GB de capacidad / Modelo A1332 / Blanco y Negro.

Preguntas 2397 Ver todo

voice not coming or going during phone call

my phone is working fine but no voice coming or going in phone call even i cant hear when i switch to speaker phone.i can record and hear recording through my mic is fine but why my sound is not reaching other person during call?plz any 1 can help me out

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
1 comentario

also facing the same issue ...

is this hardware issue or software ?

- de

Agregar un comentario

3 Respuestas

Respuesta Más Útil

When recording, your speaker turns into a microphone as well to boost the overall quality and sound of the recording. However when you make a phone call, this option is disabled and the top microphone (right next to the earphone jack) is used for this purpose.

If i were you i would check the iPhone's limited warranty to see if you are still covered, and if so contact apple to organise a free replacement. If you aren't then you will have to do some extensive testing with various parts to diagnose the problem.

Hope this helps :D

Fue útil esta respuesta?

Puntuación 1

1 comentario:

no warranty what should i do now plz help how can i fixit

- de

Agregar un comentario

Tighten all the screws on the EMI cover, if no improvement try removing those screws and check the big screw under the emi panel, install all those screws and ops check your phone.

If still no improvement try cleaning the contacts on your logic board, Good luck.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Did this help? Is it working now? I have this same problem after changing display to iPhone 4. Everything else works, even Skype with internal speaker and external speaker, but phone calls does not work at all, in any direction. Connection is made and signal is strong, but no sound in either way. No improvement for me in tightening EMI shield - have to check logic board contacts next.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

farhan estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 2,450