Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Lanzado el 25 de septiembre de 2015. Modelo A1688 / A1633 . La reparación de este dispositivo es similar a las generaciones anteriores, que requieren destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16 , 64 , o 128 GB / plata, oro, gris espacio, o la opcion de oro rosa.

Preguntas 2488 Ver todo

Screen very dim after replacement

Guys maybe you can help me, after the screen replacement the brightness of the screen is very very low, almost impossible to see I have to put a light against the screen to see something, what can it be?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Hi Francesco,

It sounds like the backlight on the screen is not working. This may be due to a blown backlight circuit—which may happen if you tried to reconnect the display with the battery attached and powering the logic board.

You can try to carefully re-seat the display connectors (make sure to disconnect the battery first) to see if that will solve the issue.

Fue útil esta respuesta?

Puntuación 0

Comentarios:

Thanks, I think you are right, I probably didn't realised when I was connecting the display the battery was still connected. Unfortunately I tryied to re-seat the connectors but nothing changed. Sometimes seems the backlight is coming back, like flashing for one second.

- de

Agregar un comentario

Añadir tu respuesta

Francesco Bandinu estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 46