Repara tus cosas Comunidad Tienda

Guías para la versión Wi-Fi del iPad Mini 2. Anunciado el 22 de octubre y lanzado el 12 de noviembre de 2013. El iPad mini 2, también conocido como iPad mini con pantalla Retina, tiene todos los píxeles del iPad Air en un tamaño más pequeño de 7.9" factor de forma.

Preguntas 221 Ver todo

Opciones

Parts of screen unresponsive after repair

I smashed the screen of my iPad Mini 2 a few years ago, the damage was minor but I chose to get it repaired professionally. The screen works for the most part but certain areas such as the top right hand corner and individual keys on the onscreen keyboard on landscape mode are unresponsive.

I have not damaged the replacement screen in any way, so what could be causing this issue considering most of the screen works perfectly. It’s frustrating because the device still works pretty well given it is almost 7 years old, but it is annoying having to turn the iPad around to use certain functions.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

@boymetworld91 this “it is annoying having to turn the iPad around to use certain functions. “ is a clear indication that the issue is your digitizer. It is really not uncommon to get some that are damaged even prior to installing. Replace the digitizer once more then re-evaluate.

Fue útil esta respuesta?

Sí No
Puntuación 3

3 comentarios:

What is a regular cost to do this, the iPad is 7 years old and having replaced it once I don't want to spend big bucks again if investing in a new iPad would make more sense.

- de

@boymetworld91 you can get the digitizer for the iPad Mini 2 for around $20 USD Use this guide for the repair Reemplazo del conjunto de panel frontal de iPad Mini 2 Wi-Fi

- de

Before trying another digitizer there are two things to check.

Inspect the screen connector for the digitizer on the logic board. The pins in that connector can come off quite easily when unplugging it.

The way to avoid pins popping off is to pull disconnect from the corner of the connector only with a nail.

If there is indeed a missing pin it'll need to be replaced by someone that does microsoldering.

Also just in case if there is no yellow tape at the bottom border of the digitizer behind make sure to apply that to avoid any EMI interference with the home button cable and housing of the iPad.

- de

Agregar un comentario

Añadir tu respuesta

Dan estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 52