Saltar al contenido principal

Información de reparación y desmontaje de los auriculares verdaderamente inalámbricos Powerbeats Pro. Lanzado en mayo de 2019. Número de modelo: MV6Y2LL/A.

Preguntas 11 Ver todo

Is the little screen behind the rubber ear tip replaceable?

The little debris screen that sits behind the rubber ear tip fell off and is gone. I’m sure this is going to cause issues down the road, can this be purchased?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 4
1 comentario

Yes, you can buy in-ear generic meshes. Please measure size. Not sure if it's 3 or 4mm size. I've replaced both metal meshes, as they got loose after couple of years of using the PowerBeats Pro.

The generic meshes you can find will work. Make sure they have adhesive.

- de

Agregar un comentario

2 Respuestas

Respuesta Más Útil

Hi

Sorry there wasn’t a answer sooner ,iv only found it unintentionally but here’s your answer

Iv never seen any sold but with some precision adhesive skills and a donor earbud it can be replaced

Hopefully this answers your question

Thank:)

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario


Yes, you can buy in-ear generic meshes. Please measure size. Not sure if it's 3 or 4mm size. I've replaced both metal meshes, as they got loose after couple of years of using the PowerBeats Pro.

The generic meshes you can find will work. Make sure they have adhesive.

Here's an example link to an Aliexpress ... bot sure if it's allowed to post that link. But you can find them in any sizes and it works.

https://de.aliexpress.com/item/100500414...

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Mike K estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 6

Ultimos 30 días: 18

Todo El Tiempo: 600