Repara tus cosas Comunidad Tienda

The Samsung Galaxy Tab A 10.1 is known by different models depending on the features. Regular model: SM-T580 (WiFi), SM-T585 (3G,4G/LTE and WiFi) released in May 2016 or S-Pen model: SM-P580 (WiFi), SM-P585 (3G,4G/LTE and WiFi) released in September 2016. It is a 10.1- inch tablet manufactured by Samsung Electronics and their new high-end “A” series.

Preguntas 108 Ver todo

Opciones

Board connector for speaker ribbon

Block Image

Alright I am looking to replace both the LCD and Speaker? board connectors.

It's the connector to the left of the LCD one with a thin white ribbon that goes down to the bottom connector just below the battery.

9 pin ribbon with I guess a 0.3 pitch?.

Anyone know where I can get these from? I have looked everywhere and can only find 0.5 pitch which is too big.

I have already taken both broken connectors off.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

David H that connector is Samsung part number 3708-003273 You could always try places like this or this one

What exact model number is your Galaxy Tab A 10.1

Fue útil esta respuesta?

Sí No
Puntuación 3

6 comentarios:

Thank you for your comment. Is this in regard to the smaller 9 pin connector and not the LCD connector?.

The links you posted are for 20P.

I checked findparts4u and they have 7P but not 9P.

- de

At this time all I can tell you is that on the schematic for the T580 the connector is labelled as a 3708-003273. You may have to contact the sellers to verify the pins on that. We still need to know the exact model number for your Galaxy Tab A 10.1 That may or may not make a difference.

- de

SM-T580 is on the label with the S/N

- de

yes that is the schematic that shows this to be the right connector. Post some pictures of your connector vs a stock photo. I think I know what your concerns are

- de

Currently, there is no connector on my board - it was damaged and removed.

I think I was mistaken - this is the home button ribbon right?.

The problem I got is trying to source this actual part - I've tried contacted quite a lot of places but no-one seems to have a 9P 0.4mm pitch FPC bottom contact connector lol

I think it may be possible to solder the ribbon directly to the board, otherwise, I think maybe a new mainboard/motherboard is the only option?

- de

Mostrar 1 comentario más

Agregar un comentario

Añadir tu respuesta

David H estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 7

Todo El Tiempo: 258