Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1688 / A1633 . La reparación de este dispositivo es similar a las generaciones anteriores, que requieren destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16 , 64 , o 128 GB / plata, oro, gris espacio, o la opcion de oro rosa.

Preguntas 2693 Ver todo

iPhone 6s suddenly screen blured and died

Im using my Ip6s while charging and it has 50-60% batt. Suddenly the screen blur and then turn black then die, Now my phone wont open at all no response like completely dead i try to open it by pressing power button no response, plug in to charger no response i try preasing vol up and dow plus power button and it just vibrate

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

1 comentario:

Rule out parts first by replacing the screen. They are not that expansive.

- de

Agregar un comentario

2 Respuestas

The battery could be dead. Leave it on charge for at least 2 hours.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Same here, two months old. Simply recharged and pressed the sensor button and whoa....blurred screen and no response. I have found a solution that has worked both times:

1) Let the phone charge for an Hour

2) Keep cable plugged into the phone, but remove it from the computer or wall plugin.

3) Hold the Home button and right-hand side button down at the same time for like 30 seconds.

4) Your battery symbol will return. (If it doesn't, plug back in and repeat steps every 10 minutes)

5) Plug the USB connector back into the computer or wall plug.

6) Leave the phone alone to 10-15 minutes while it charges enough to turn it on.

If this doesn’t work, you could take it back to Apple and ask for help.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Kiel Gons estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 166