Repara tus cosas Comunidad Tienda

El reloj inteligente de Apple de tercera generación con conectividad celular opcional lanzado el 22 de septiembre de 2017.

Preguntas 197 Ver todo

Opciones

Apple Watch series 3 no touch after screen replacement

I recently replaced the screen on my Apple Watch series 3 Nike + edition. The screen comes on and the buttons work but there is no reaction from the device when I touch the screen. I have tried force restarting it dozens of times and it has changed nothing. The old broken screen does not work at all so I believe that trying to use the old digitizer will not work. Anyone have any ideas?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 1
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Sounds like either the display assembly was defective or the cable connection from the SIP was not fully inserted and latched or was damaged.

Block Image

Fue útil esta respuesta?

Sí No
Puntuación 1

4 comentarios:

I have tried reseating the cables a couple of times and that hasn't changed anything, unfortunately, so I am beginning to wonder if there is another component that might be damaged or if the unit is now useless

- de

I went back and tried your solution and to my surprise, it worked! I can't believe it was that simple of a solution, thank you!

- de

What exactly was the solution? @Blake Russell

- de

@chi.areadj - Either the cable was not fulled inserted or the display unit was defective.

- de

Agregar un comentario

Opciones

Blake what was it that you did exactly? I am having the same problem…I can’t get touch to work. The touch cable appears to be seated into the connector…I’m stumped

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

Hi Jerrod, did you ever resolve the problem with your watch? I have the same issue.

- de

Agregar un comentario

Opciones

For me the solution was update the firmware and after the touchscreen start to work fine.

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

I purchased one of these sapphire screens for series 3. Screen works but in constant restore loop. Firmware upgrade fails each time also

- de

Agregar un comentario

Añadir tu respuesta

Blake Russell estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 19

Ultimos 30 días: 91

Todo El Tiempo: 4,020