Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Released June 2016, identified by model number A3003 in Europe, A3000 in China and North America (according to https://forums.oneplus.net/threads/oneplus-3-regions-model-numbers.452381/)

Preguntas 59 Ver todo

Digitizer does not work after screen replacement

I replaced screen and digitizer and it seems everything went fine. The phone turns on but the touch doesn't work, the back and all app button do work. I tried doing a factory reset but it stills doesn't work. What could be the problem?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

Kit de Destornilladores Manta

112 bits for every fix.

Upgrade Your Toolbox

Kit de Destornilladores Manta

Upgrade Your Toolbox

1 Respuesta

Hi Neil,

I would suggest disconnecting and re-seating the display cable. Carefully check the connector for any debris—the pins on the connectors are tiny.

OnePlus 3 Screen and Digitizer Assembly Replacement

Fue útil esta respuesta?

Puntuación 0

Comentarios:

Hello Arthur,

I tried disconnecting and re-seating the display cable as you suggested but still nothing. Could it be a motherboard problem or should I send back the display+digitalizer and try with another one?

- de

Hey Neil,

It could be a motherboard, though I'd think that the display may have a slightly higher chance of being the problem. Does the original screen work enough to be used as a test? Unfortunately with how the replacement is set up, it's not easy to swap displays.

- de

Agregar un comentario

Añadir tu respuesta

Neil Considine estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 32