Saltar al contenido principal

Wi-Fi only version of Apple's 2nd generation iPad Air. Model A1566.

Preguntas 125 Ver todo

Missing socket for WiFi antenna cable from iPad Air 2

While prying off old antennae cable from socket during WIFI antennae replacement of iPad Air 2, socket was accidentally removed from board. Is there a replacement part of some way to fix this?

¡Contestado! View the answer I have this problem too

Is this a good question?

Puntuación 1

Comentarios:

Could you add a picture or two?

by

Añadir un comentario

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

3 Respuestas

Solución elegida

There are really two options for this:

  • Order a replacement iPex antenna socket and attempt to solder the replacement to the logic board (I would order a wifi card with the same socket and transfer the connector)
  • Strip back the antenna wires and solder them directly to the logic board.

¿Ha sido útil esta respuesta?

Puntuación 1
Añadir un comentario

Thank you so much for this!

¿Ha sido útil esta respuesta?

Puntuación 0

Comentarios:

I’m having a hard time finding a replacement SOCKET for this. I’m only finding the same piece I’ve already replaced ‘WIFI antenna and GPS ANTENNA FLEX CABLE REPLACEMENT’ which does not include the socket. Do you have any suggestions? Do you have any videos on soldering the wires to the board directly (missing socket)?

by

Añadir un comentario

I haven’t had success downloading a pic to share.

¿Ha sido útil esta respuesta?

Puntuación 0
Añadir un comentario

Add your answer

Mary Jo Webb will be eternally grateful.
Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 12

Global: 31