Saltar al contenido principal

Lanzado en Septiembre 16, 2016. Modelos 1660, 1778. Disponible en GSM o CDMA / 32, 128, o 256 GB / Oro Rosa, Oro, Plata, Negro Mate y Negro Brillante.

Preguntas 1364 Ver todo

During battery removal the black outer coating got torned

During my battery removal of iPhone 7 plus there are three pull tabs.

1 came out fine

Other two got broken initially and was not able to get them

During insertion the black outer coating got torn and some chemical smell is coming out from it.

What should I do?

Should I tape it and use it ?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Respuesta Más Útil

The black outer coating on batteries are there to keep all of the chemicals that make the batter work INSIDE the battery. If that outer layer has been punctured you will likely have those chemicals coming out of the battery over the course of its lifetime, with some potentially dangerous results. At this point you should be properly disposing of the punctured battery and ordering a new one.

Fue útil esta respuesta?

Puntuación 1

3 comentarios:

Sir the battery is not punctured only the black film got torn can it be used

- de

No chemicals are coming out of the battery just the black cover is torned

- de

@anonymous_123 If you can already smell the chemicals it means the battery has been punctured and I would not recommend using it in the phone

- de

Agregar un comentario

Añadir tu respuesta

Anonymous estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 17

Todo El Tiempo: 787