Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1688 / A1633 . La reparación de este dispositivo es similar a las generaciones anteriores, que requieren destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16 , 64 , o 128 GB / plata, oro, gris espacio, o la opcion de oro rosa.

Preguntas 2115 Ver todo

Home Button not working

Hi after I succesfully replaced the screen on my Iphone 6s I closed up my Iphone and powered it on. Display was fine but when I unlocked my phone I got a message saying “touch id is unavailable” I opened up settings and went to sucurity and tried to enter a new fingerprint in and I got a error message saying Touch ID is unavailable I went to exit settings and saw that the home button doesn’t respond to being clicked at all i swapped back my old screen to see if the IFIXIT screen was faulty and the home button still didn’t work im stumped I hope somebody is able to help me wih this I really don’t want to have to go to apple and pay there ridiculous prices. Help would be greatly appreciated.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

1 Respuesta

Solución Elegida

Hey. First,did you disconnect the battery prior to the repair?

Is the home button flex torn? Did you check it with a magnifying glass? This is beyond common to happen. It can tear so easily. When you lift it from the original adhesive,it can tear. This may have happened. Or if you were rough with it,the flex could have bent too much,or the fpc connector could have been damaged.

Fue útil esta respuesta?

Puntuación 0

Comentarios:

Hi thank you for your reply I did dissconnect the battery but I most likely did damage it I just didn't know if this was a software problem or a hardware problem. Thank you for the reply

by

No problem.

It is probably a hardware problem. There are people who can microsolder home button flex cables...but it isn’t usually worth the cost unless it’s an iPhone 8 or something.

Just make sure you’re connecting the flex cable in the correct orientation.

by

Agregar un comentario

Añadir tu respuesta

Lachlan Ketland estará eternamente agradecido.
Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

Todo El Tiempo: 29