Rep: 1
1
Philips 47PFL7432D/37 suddenly started to flicker and go dark on one side only. Symptoms point to backlight inverter. TV has master and slave inverters; by location seem to be associated with sides of screen. As a rule (general or specific), should both inverter boards be replaced if it seems that only one is failing?
Es esta una buena pregunta?
Rep: 784.3mil
1.1mil
894
2.3mil
Mike Pepper my rule of thumb is that when one fails the other one is most likely right behind. Always do a visual check for any burned, charred or missing components. If you have one of those issues on either one of the inverters, replace only the one with the failure.
Fue útil esta respuesta?
Thanks very much, for both bits of advice.
No overt damage or missing parts, so onward to find the parts. Thanks again for your quick and to-the-point reply.
Ultimas 24 horas: 0
Ultimos 7 días: 3
Ultimos 30 días: 10
Todo El Tiempo: 200
