Saltar al contenido principal

Modelo A1419 / EMC 2806 / Finales de 2014 o mediados de 2015. 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (ID iMac15,1); EMC 2834 finales de 2015 / 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (iMac17,1) Todo con pantallas Retina 5K

Preguntas 576 Ver todo

Is there a SATA Cable and HDD mounting brackets already installed?

Hi,

I hope you can help me!

I recently bought a late-2015 27” iMac with a 5K display. (iMac 17,1)

The computer I bought was born with a 250GB blade SSD only – this means no SATA-HDD installed from factory.

I don’t want to open and take a look; therefore, I was hoping that someone is in the “know”.

Will there be a SATA Cable (I already ordered one, I can just sell it if there already is one inside); and will there be any HDD mounting brackets already installed?

I have just asked the seller; the computer has not undergone any upgrades since he bought it new in October 2015.

Thank you!

Rasmus

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

1 Respuesta

Respuesta Más Útil

A virgin Apple iMac with a blade SSD won’t come with the SATA cable. The 27” models does come with the bracket but you will need the screws to mount the 3.5” HDD drive or the adapter frame to hold a 2.5” SSD or HDD.

I assume you are planing on adding a drive. Don’t forget to order [producto vinculado inexistente o deshabilitado: IF174-005] as you’ll need the adhesive strips and the pizza cutter tool to remove your display. You will likely want two sets of these Plastic Cards as well.

Update (08/02/2019)

You need two stud screws and two flat head screws to hold the drive to the frame.

Here is the needed screws

Block Image

iMac 27" Screw Set - Hard Drive Mount Left (x2)

Block Image

iMac 27" Hard Drive Pins (x2)

If you are putting in a 2.5” drive you’ll need an adapter frame and then the screws to hold the drive to the adapter frame

Imagen de Plastic Cards

Producto

Plastic Cards

$2.99

Fue útil esta respuesta?

Puntuación 2

2 comentarios:

Thank you, Dan :)

I’ve already got adhesive strips and the pizza cutter tool. And I have ordered a new HDD also - but I didn’t know which parts I had or had not.

To clarify, do I need 2 or 4 screws? Can you maybe link to a listing on ebay?

Thank you again, Dan :)

- de

Perfect, thank you! :)

- de

Agregar un comentario

Añadir tu respuesta

Rasmus Jacobsen estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 83