Saltar al contenido principal

Modelo A1312 / Mediados de 2010 / 3.2 GHz Core i3 o 2.8 y 3.6 GHz Core i5 o 2.93 GHz Core i7, ID iMac11,3

Preguntas 383 Ver todo

Replaced Harddrive with SSD and drive not being recognized

I replaced the hard drive with a SSD on my imac, 27”.  I copied the old hard drive before I started.  Replaced drive with SSD from ifixit upon reboot it is not recognizing it, tried to do a time machine recovery but new drive not recognized to write to.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

1 Respuesta

Respuesta Más Útil

You need to format the drive GUID Mac Extended Journaled before you start or your Mac will not see it internally. Use Disk Utilities to do this.

I would format the drive first, then install the system. Now use Migration Assistant to move your data. This way the Repair Partition gets installed.

Fue útil esta respuesta?

Puntuación 2

2 comentarios:

Similar problem but when I run Disk Utility it only recognizes the external backup drive and NOT the new SSD.

- de

@irvsnyder Please start a new question on this as the advent of Mojave and Catalina and the new APSF formatting has introduced new problems when install and recognizing non-APSF formatted external drives.

- de

Agregar un comentario

Añadir tu respuesta

gretchen estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 58