Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Kohler makes the gas powered engines for many different riding mowers & garden tractors both for home owners and professionals.

Preguntas 8 Ver todo

Why is my mower not wanting to engage the blades right?

2013 cub cadet 1050. When I engage the mower deck it wants to sputter to a stop. If I mess with the throttle a little it will come on and mow perfectly. Sometimes it just does its little sputtering fit and will engage. New belt, spindles, blades, and fuel filter.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

Kits para Nintendo Switch

A quick fix to get back in the game

Shop Switch Kits

Kits para Nintendo Switch

A quick fix to get back in the game

Shop Switch Kits

1 Respuesta

Respuesta Más Útil

@stevenstickley make sure that you replace/clean the air filter and the spark plugs. A plugged air filter or faulty plugs can cause the engine to run rich. after you check on that I would recommend checking the choke/carburetor. If the mower still bogs down after that, the problems is most likely a carburetor. A good cleaning of the jets and float (needle valve) and setting the choke should work.

Fue útil esta respuesta?

Puntuación 1

Comentarios:

It runs perfect when the decks off and after the mower finally engages, that's what threw me off a little

- Por

It sounds like it is choking when you put a load on the engine which is commonly caused by a carb that is running to rich.

- Por

Agregar un comentario

Añadir tu respuesta

Steven stickley estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 21