No chime, black screen, white light steady

Question

iMac Intel 24" EMC 2111

Modelo A1200 con procesador Core 2 Duo de 2.16 o 2.33 GHz

Preguntas 113 Ver todo

s m @l6bmwbeezgg51td

Rep: 21

2

1

Publicado: 9 de jul. de 2011

Opciones

No chime, black screen, white light steady

Hi guys,

If iMac is off, but power is plugged in, number 1 diagnostic LED is on.

If iMac is on, no chime, fans go max, black screen, white light stays steady and number 1 and 2 diagnostic LEDs are on.

If LCD unplugged and external monitor plugged in, can't turn off, it turns right back on, once external unplugged, it turns off.

Also tried with detaching everything (add on cards, hard drive, etc.), no results.

Maybe the power supply? Hope its not the logic board....

Any ideas?

Thanks!

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación -1

Agregar un comentario

3 Respuestas

Solución Elegida

mayer @mayer

Rep: 685.3mil

MacHale Enterprises

3.4mil

1.1mil

2.6mil

Publicado: 9 de jul. de 2011

Opciones

LED Startup Sequence

LED #1 = Power available.

If no LED is visible:

• Verify AC source

• Verify known-good AC cable is connected

• Verify cable connection between AC inlet and power supply

• Verify cable connection between power supply and logic board

• Verify power supply

LED #1 + LED #2 = Power available, and system is powered on.

If second LED is not visible when power button is pressed:

• Verify power button connection to logic board

• Verify power button functionality

• Verify cable connection between power supply and logic board

• Verify power supply

• Verify logic board

LED #1 + LED #2 + LED #3 = Power available, system is powered on, and video card found.

If third LED is not visible after power on:

• Verify that MXM video card is seated properly

• Verify logic board

Fue útil esta respuesta?

Sí No

Puntuación 3

5 comentarios:

Thank you for the prompt response.

• Verify logic board

What kind of tool is required for that?

Thanks.

9 de jul. de 2011 - de s m

Exchanging the logic board with a known good one. Remember these instructions are for an Apple tech sitting there with all the resources in the world at his fingertips.

9 de jul. de 2011 - de mayer

Thank you, so if third LED is not on, most likely logic board.

9 de jul. de 2011 - de s m

Logic board or video card. I don't remember if this video card can be changed or not. I would check with these folks on a board repair: http://www.dttservice.com/imacintel.html

9 de jul. de 2011 - de mayer

+ Good Kung Fu

30 de ago. de 2011 - de ABCellars

Agregar un comentario

Thank you for the prompt response.

• Verify logic board

What kind of tool is required for that?

Thanks. — s m
Exchanging the logic board with a known good one. Remember these instructions are for an Apple tech sitting there with all the resources in the world at his fingertips. — mayer
Thank you, so if third LED is not on, most likely logic board. — s m
Logic board or video card. I don't remember if this video card can be changed or not. I would check with these folks on a board repair: http://www.dttservice.com/imacintel.html — mayer