Saltar al contenido principal

The Mazda Capella was commonly known in markets outside Japan as the Mazda 626. The Mazda 626's sixth-generation was built on the GF platform and released in 1997 for the 1998 model year.

Preguntas 54 Ver todo

Where is the fuseable link for the ignition

where is the fuseable link between the battery and the ignition switch

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Solución Elegida

I know that there is a 100 amp fuse that is bolted in place. There are access covers on the side of the fuse block that allow you to remove the 2 8mm-headed bolts holding it in place. Here is a Video that will show you the location as well as how to change it.

So the main fuse is under your hood in the fuse block. I attached a few pictures so you know what to look for. The red circle is the main fuse the yellow you can ignore since that is not your problem. They are for the EGI. Also attached an image for all of your fuses. The manual says to remove the fuse disconnect the negative battery cable.

Remove the main fuse block cover, remove the main fuse block mounting nuts. Remove the MAIN fuse mounting bolt to remove the fuse.

Hope this helps with your problem. Good Luck

Block Image

Block Image

Block Image

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

It should be under the hood, in the fuse box. It isnt a small fuse like you would change normally, it is a larger 50A one probably.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

timothyguy estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 10

Todo El Tiempo: 4,608