Rep: 79
5
2
Hi
i bought a bent iPhone 6 off eBay. I completely disassembled it to un-bend it. I fixed the bend but when I was putting the logic board back in I realised that the top part of it was stuck over a piece of plastic, which had bent it. I removed it again and tried to bend it back but it snapped off. Could somebody tell me if the logic board will still work?
i have attached pictures to show the damage
Es esta una buena pregunta?
Rep: 221.4mil
15
289
807
As @pollytintop suggests, the best way to find out is to install it. However, I have looked at the circuit board with ZXW Tools and the only copper trace that runs in that area is for a Test Point. So you should have no issues running the phone properly despite this issue.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 68
3 comentarios
there's no picture..
- de pollytintop
Sorry they’re there now
- de Shay Mitchell
should be fine.. I don't think that tiny part has a great significance apart from securing to the housing. I'd try installing it again, it's the only way to find out!
- de pollytintop