Saltar al contenido principal

iPhone de 4 pulgadas lanzado en marzo de 2016 con especificaciones de hardware similares al 6s. Disponible en Plata, Gris espacial, Oro u Oro rosa con opciones de almacenamiento de 16/64 GB. Modelos A1662 y A1723.

Preguntas 610 Ver todo

Why does shaking my iPhone make touchscreen responsive?

I have a purchased a used iPhone SE that I just recently noticed goes through periods where the touchscreen doesn’t respond at all. These are intermittent and there doesn’t appear to be any fixed period of re-occurrence. There are no visible signs of damage to the screen either in cracks or dead pixels. At first I attempted force restarts to clear the problem and generally anywhere from 3-7 force restarts will cause the screen to respond again. I’ve also reset the phone and restored from an iCloud back up, but still experienced the same issue. Recently I’ve notice shaking the phone, a bit more vigorously than you would to use the shake to undo feature, will also clear it. Is this a software issue or am I looking at a screen replacement?

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

1 Respuesta

Solución Elegida

This is not a software issue but a hardware one. You will need to determine if the problem is related to the screen or the logic board. Because this is a used device, you don’t really know what’s it been through.

The first thing to try re-seating the screen connectors. I doubt this is the issue but you have to start somewhere and this one is free :>). The next step is to try a good quality (preferably known-good) replacement screen. You can check out this guide for instructions on how to replace one. It also includes a link to the iFixit replacement screen. If that doesn’t solve your problem, then you are probably looking at a logic board issue. This could be damaged connectors or simply a damaged logic board. This is potentially repairable but will require the expertise of a micro-soldering tech.

Fue útil esta respuesta?

Calificación 3
Agregar un comentario

Añadir tu respuesta

Jake Brown estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 22