Saltar al contenido principal

A wireless, more traditional, video game controller produced by Nintendo for the Switch system. Model number: HAC-013.

Preguntas 14 Ver todo

Water Damage Switch Pro Controller

I spilled a full cup of water on my pro controller and I was unable to get the battery out because of a stripped screw. I eventually drilled and extracted the screw, but the controller shorted. I opened it completely and cleaned out the corrosion; however, I still am unable to get a response from the controller.

Because the controller was new, the battery was new. Water did not penetrate to far into the controller and a few drops entered around the type-c charging port. The only part I was unable to clean is the charging port.

I am looking for a recommendation basically on how to proceed to get the controller operational.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

1 Respuesta

Respuesta Más Útil

Remove the battery. Completely Submerge the controller in isopropyl or ethyl alcohol. If you can scrub the charge port with a toothbrush that’s good. Let it dry for at least 24 hours or until there is no alcohol remaining at all. You can accelerate this process with an air gun or canned air. As long as it’s completely dry you can put the battery back in and power it on.

I’ve had this technique work on multiple laptops and a Nintendo DS in my shop. Hopefully it works for you too. Good luck.

Fue útil esta respuesta?

Calificación 2
Agregar un comentario

Añadir tu respuesta

Peter H estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 5

Últimos 7 Días: 19

Últimos 30 Días: 83

Todo El Tiempo: 265