Repara tus cosas Comunidad Tienda

Opciones

7 plus boot loops when front camera flex is plugged in

So i replaced screen on an iphone 7 plus, transfered all parts to new screen and re assembled, but it was stuck in a boot loop, i opened the phone back up and found that if i unplugged front cam flex it boots and works fine. So i oredered a new cam flex which did the same, i tried a cam flex from an 8 plus i have as they look identical and still got the same. Now if i take the cam flex off screen and plug in seperately the phone seems to work. I am baffled here

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
1 comentario

To top things off i have just taken the iphone 8 p screen with cam flex installed, put it on my 8p and it works flawlessly

- de

Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

I don’t know for certain if an 8P FCAM flex will work on the 7P…I doubt it does even if it looks identical. Looking at the schematic, I see that the pinouts are different and the voltages used to power the camera are also slightly different.

At any rate, you really need to have access to a known-good 7Plus FCAM in this instance to rule out a modular issue or not. That said, if it seems to work when connected but not fully installed, there may be some damage to the flex that is “shorting out” or kinking when fully installed.

Fue útil esta respuesta?

Sí No
Puntuación 2
Agregar un comentario

Añadir tu respuesta

tony shaw estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 93