Saltar al contenido principal

A1706 / EMC 3071: lanzado en noviembre de 2016, este Macbook Pro de 13 "presenta la barra táctil OLED. Cuenta con una CPU Intel Core i5 de doble núcleo" Skylake "y cuatro puertos Thunderbolt 3.

Preguntas 239 Ver todo

MacBook Pro Touchbar no backlight on new screen

Hey Gang!

Wondering if you guys have any ideas on how I can get this sorted out.

Here in the office, one of the MacBook Pro 13’’ Touch Bar has a small amount of liquid damage according to Apple and that’s why the backlight wont work. Apple actually replaced the screen on this laptop anyway under the quality program but the issue persists.

System works fine with an external display and if a flashlight is held against the laptops screen one can see the desktop images.

Wondering if there are any simple repairs one can do, or if there is someone in the UK that does logic board repairs just like Louis Rossmann?

Thanking you in advance,

rafa

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
2 comentarios

Can you tell us which model you have 2016, 2017 or 2018?

- de

hey dan, sorry, should've mentioned. 2016 model.

- de

Agregar un comentario

1 Respuesta

Respuesta Más Útil

I’m thinking they didn’t fix the issue. This series has a known issue with the displays ribbon cables. If you slowly raise or close the lid around 45 degree’s the display will wink on or off. The ribbon cables are part of the lid assembly and can’t be replaced. Here’s a good view of the connections:

Block Image

I would go back to have the display assembly replaced again (under the repair warranty). The only other possibility is a defective Hall sensor which is part of the logic board on the backside

Block Image

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

Rafa Neves estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 1,833