Saltar al contenido principal

The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Preguntas 268 Ver todo

power button nothing comes on or it will light up and go right off

Mayer

i have a Kenmore Elite front load dryer that periodically gives me trouble when I push the power button either nothing comes on or it will light up and go right off.

Any help in this matter or ideas on how to troubleshoot would be welcomed

thank you

¡Contestado! View the answer I have this problem too

Is this a good question?

Puntuación 0
Añadir un comentario

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

1 Respuesta

Solución elegida

Start Switch

The start switch is on the dryer control panel. Depending on the model, either press a button or turn a dial to start the dryer. If the start switch fails the dryer won't start or make any noise. Test the switch with an ohm meter or continuity checker. If the dryer hums when the start switch is activated, or if the motor runs only while activating the start switch, the motor might be defective or something might be binding the drum preventing it from turning freely. If the dryer start switch does not have continuity when it is activated, it will need to be replaced.

¿Ha sido útil esta respuesta?

Puntuación 2
Añadir un comentario

Add your answer

Paul Farrell will be eternally grateful.
Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

Global: 14