Repara tus cosas Comunidad Tienda

La HP Officejet 4630 es una impresora multifunción inalámbrica de inyección de tinta a color.

Preguntas 14 Ver todo

Opciones

Ink cartridge failure help

I have a HP 4630 OfficeJet Printer. I have a new HP 61 black ink cartridge that I ordered from HP. I put it in the printer, and it continually says, " Ink Cartridge Failure". I have done all I know to do, reset the printer, cleaned the contacts, etc. I have been on HP.com and nothing works. It is out warranty, so you can only access information on HP.com for tech help. Does anyone know anything to help me with this problem?


Here is other messages that shows on the printer


1. Ink Cartridge(s) Problem The following Ink Cartridges must be replaced. I have brand new ink cartridges.


2. It was printing about 2 weeks ago, when I replaced the empty ink cartridge. Then, it stopped. I called HP and they sent another one. Now, it will not accept the new cartridge. 


3. I have downloaded print drivers from HP.com and I have uninstalled and reinstalled the printer software about 4x.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 2
2 comentarios

Mine prints but nothing is printed out on my paper? THe ink cartridge indicator shows over 1/2 full?

- de

Mine won't accept genuine HP cartridges. Says incompatible cartridge (new black). HP Support says to clean everything. Did that but same display. HP says to take it in for repairs.

- de

Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Whew! I have been at this printer off and on and had tried everything. Lo and behold, today I just took some scotch tape and taped over the bottom of the ink cartridge (The part where the original tape comes when you buy a new one and take it off) and inserted it back into the printer, then I took the tape off and inserted the cartridge back in the printer. All of a sudden the error message "ink cartridge failure" was gone and the control panel on the printer showed and was up ready to print. I can't even explain it. But, it is printing again. Thanks everyone!

Fue útil esta respuesta?

Sí No
Puntuación 5

4 comentarios:

van you explain this as i am currently having the same problem

- de

I’m having the same problem

- de

Didn't fix mine.

- de

Mine neither. I hate printers

- de

Agregar un comentario

Opciones

can you explain more detailed how you fixed it

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Opciones

I read the comments above, put a tape over the black ink ink part, took it off and put it back, and it didn't work, I then took out my color ink, which the ink part on the color ink had melted, i seldom used the color ink, it was saying I am now on single ink, and it worked! now it's printing!

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

Surprisingly, removing the color ink cartridge, closing the empty location of the printer's color ink "clip" as much as possible, gave me the "printing from single cartridge" comment, it then printed a (blank) alignment page, I scanned it, read "alignment failed" and chose "OK", another attempt, alignment of just black page printed and scanned, and then itprinted fine with just the black ink.

- de

Agregar un comentario

Añadir tu respuesta

Sonya estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 17

Ultimos 30 días: 69

Todo El Tiempo: 19,946