Saltar al contenido principal

Lanzado en Septiembre 16, 2016. Modelos 1660, 1778. Disponible en GSM o CDMA / 32, 128, o 256 GB / Oro Rosa, Oro, Plata, Negro Mate y Negro Brillante.

Preguntas 1335 Ver todo

flashing apple logo after new screen installation

after switching out the new screen, the screen would only display a flashing apple logo. tried restoring and updating and it wouldn’t work.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

1 Respuesta

Solución Elegida

There are a few of possibilities here:

  1. It could be a bad replacement screen. Try installing the original screen to see if the problem goes away. If it does, then you probably have a bad replacement screen.
  2. It could be damage to the Home Button or Front Camera Flex. Take a close look at the flexes and connectors, preferably with magnification. If in doubt, just connect the screen alone without the FCAM or HB. The bootup will take longer but once booted, everything else should work.
  3. You have logic board damage. This could be caused by accidental damage during the repair or latent issues that only crop up after repairs and the requisite shutdown and reboot, such as the Audio IC or Baseband. If you have a short bootloop (~10 secs) it’s usually the Baseband IC.

Fue útil esta respuesta?

Calificación 4
Agregar un comentario

Añadir tu respuesta

sam sherman estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 34