Saltar al contenido principal

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1169 Ver todo

Replaced LCD and phone worked but ear, checked cables now no power

I have an iPhone 3G that had a shattered screen and LCD. I bought replacement parts and did the repair. Everything seemed to be working until I made a phone call and could not hear from the ear piece, only sound would come when put into speaker mode. I read that maybe connector 3 was not fully seated so I went back inside the phone and tried to re-position the connector, now the phone will not turn on. I plugged it in and even after awhile of "charging" it would not even vibrate when the switch was moved. Does anyone know what may have happened, and what I can do?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

check all your connections.. you may have dislodged the power flex (no. 5 or 6... the square shaped connection in the top left of your board) or the display isn't connected so you need to check 1+2, give them a firm press or they tend to pop off when you close up the display.

Fue útil esta respuesta?

Puntuación 4
Agregar un comentario

Añadir tu respuesta

Brandon estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 721