After changing the front glass of iPad Air (A1474 Model) and turning the Power on the iPad comes on with Apple symbol than turns off than on than off than on and keeps going this way. Anyone that experimented this problem. Any feed back will be appreciated.
Es esta una buena pregunta?
Rep: 221.5mil
15
290
807
Your iPad is boot-looping. If it was working properly prior to you doing the repair, then I would double check your work by following this guide. Look for damaged flexes or connectors or any possible missing components on the circuit board next to the connectors that may have been accidentally pried off during the repair.
It’s also possible that the replacement digitizer is causing the issue. If the old one is still usable, you could connect it instead to see. If it is too damaged, then disconnect the digitizer and LCD and boot the iPad via a Lightning connector plugged into an iTunes enabled computer. If it boots properly into iTunes, then that would indicate a possible faulty replacement part.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 2
Ultimos 30 días: 5
Todo El Tiempo: 58
