Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Lanzado el 19 de septiembre de 2014, este iPhone de pantalla de 4.7" es la versión más pequeña del iPhone 6 Plus. Identificable por los números de modelo A1549, A1586 y A1589.

Preguntas 5081 Ver todo

Boot loop caused by broken proximity thing?

Hello

I recently replaced my iPhone 6 screen.

During replacement, I broke my proximity meter thing.

The phone powered up fine, everything was working except for the proximity thing (when I made calls and held the phone up to my face, the screen didn’t turn off like it usually did).

The battery eventually died, and when I tried turning the phone back on, it got stuck in a boot loop. The apple logo seemed to flicker in brightness and sometimes I would get a red screen flash.

Other posts on here suggest disconnecting the cable and then trying to boot the phone up.

I did that, but the phone is still stuck in a boot loop with a red screen flashing sometimes. I also tried disconnecting everything but the home button and the screen itself. Still no luck.

Will installing a new proximity meter flex thing fix my phone?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

Kits para Nintendo Switch

Una solución rápida para volver al juego

Comprar kits de Switch

Kits para Nintendo Switch

Una solución rápida para volver al juego

Comprar kits de Switch

1 Respuesta

Replace the proximity sensor cable. Then do a full restore via iTunes. It’s a hardware issue that caused a software glitch. Also try using the lcd shield from your old screen if you’re not already as aftermarket ones cause problems.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Brink Laubscher estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 27