Repara tus cosas Comunidad Tienda

Segunda generación de iPad con Wi-Fi, lanzado el 11 de marzo de 2011. Número de modelo A1395. La reparación es difícil y requerirá calor.

Preguntas 250 Ver todo

Opciones

Ipad 2 does not charge even do the charging dock has been replaced

I am trying to repair an Ipad 2. The original issue was that it was not charging because it falls down.

In the first review, the charging dock looks broken from the outside, so I proceed to replace it.

But now, with the new dock, the Ipad still not charging. (there are no signs of the charging icon and it does not turn it on when the charger is connected)

When I connect the charger, it seems not to do anything.

The LCD works, the Home button works, but there is a problem with the Power button.

It does not work when pressing it.

Some ideas or where shuold I review?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

It is possible that the replacement flex you installed is also defective; small parts tend to have higher failure rates. Otherwise, closely inspect the connector on the logic board.

Does it get recognized by iTunes when you connect it?

If it still won't charge but is recognized by iTunes, then it may be an issue with the actual charge circuit.

Fue útil esta respuesta?

Sí No
Puntuación 2

4 comentarios:

First of all, thanks for your answer.

Answering your questions, the iPad is not recognized by iTunes when connected.

But I also notice that if I left the iPad charging the charging icon does not appear, but the iPad charge in a very slow way. (I left it all the night and charge like 50% more)

Do you think that the flex replacement is defective? Or should I review something else?

Thank you very much

- de

How are you charging the iPad? Via a computer, a small charging brick (like the iPhone) or the larger charging brick?

- de

With the larger one.

- de

Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows). It will tell you what the health of the battery is. Anything less than 70% of design capacity will require replacement.

- de

Agregar un comentario

Añadir tu respuesta

Diana Vargas estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 59