Saltar al contenido principal

El modelo DualShock 4 CHU-ZCT2 fue anunciado en 2016 para relevar al modelo CUH-ZCT1 que fue lanzado en 2013. Este mando es similar al modelo previo.

Preguntas 266 Ver todo

Will the JDS-040 fit on my ps4 controller when mine has JDS-050?

My Controller model is CUH-ZCT2U and the model of the port is JDS-050 so i wanted to make sure before i bought anything that might not fit, and if i do need JDS-050, where could i find one ive looked everywhere but i cant find it.

JDS-050:

Block Image

Block Image

JDS-040:

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2
Agregar un comentario

2 Respuestas

Respuesta Más Útil

I am in the same boat, need a jds-050 usb board and all I can find is the jds-040 board.. I'm gonna just order that one, the pin connectors are the same and had seen a wire diagram where they match the same, I am thinking the jds-050 was either an upgraded board or maybe a differnt manufacturer.

Fue útil esta respuesta?

Puntuación 1

3 comentarios:

Same problem. Already tried a jds-040 board. It is not compatible.

- de

so either buy a new controller or wait till they release the jds-050 to consumers

- de

I have a CUH-ZCT2U (5th gen) and my controller has a JDS-055 board. My controller works when connected to USB but will not charge. I bought a JDS-040 board by mistake. The JDS-040 can be installed in the controller but the ribbon connector is on the other side and requires the ribbon cable be twisted to make it work. The JDS-040 does allow the controller to work over USB and the lights work but still not charging.

- de

Agregar un comentario

Kindly check Alibaba. They have tons of replacement parts for JDS-050 and all other port versions.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

BurnedSpaghetti estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 21

Ultimos 30 días: 80

Todo El Tiempo: 6,267