Saltar al contenido principal

A voice controlled cassette Recorder

Preguntas 2 Ver todo

I am trying to repair a Realistic CTR-75 Cassette Voice Recorder

I need help with finding a belt schematic for a Realistic CTR-75 Cassette Voice Recorder. I got it working and I don’t know how to put on the new belts because the old belts were melting goo. Please help. My email is <redacted>

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2
Agregar un comentario

2 Respuestas

Solución Elegida

I am going to bet you, one of these will fit.

https://www.banggood.com/50pcs-40-130mm-...

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Thank you very much

- de

Agregar un comentario
Respuesta Más Útil

Hi Benjamin,

Funny enough, I bought one used a few days ago, but it wouldn't play tapes. I just took it apart. The belts were still in place put became slack and would not create enough friction to move the wheels. There are two belts, one under the green circuit board, one to the side. You have to do the bottom one first as it runs on the bottom of the big silver "flywheel". I had to unscrew three black screws to lift the circuit board.

Black screws

Block Image

Bottom belt

Block Image

Top belt

Block Image

As you can see from my photos, I tried with standard household rubber belts. I think they are to short and a bit to tight. Tapes play, but rather slow. I'll be ordering some belts as suggested by @avanteguarde and see if that helps.

Good luck and let me know how it goes.

Best,

Jens

Fue útil esta respuesta?

Puntuación 2

1 comentario:

Thank you very much

- de

Agregar un comentario

Añadir tu respuesta

Benjamin Kitaura estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 19

Todo El Tiempo: 1,734