Repara tus cosas Comunidad Tienda

Lanzado el 25 de septiembre de 2015. Modelo A1687 / A1634. La Reparación de este dispositivo es similar a las generaciones anteriores, requiriendo destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16, 64 o 128 GB / Silver, Gold, Space Grey o Rose Gold.

Preguntas 1041 Ver todo

Opciones

Back camera on iPhone not working

A customer came into my shop to replace her back camera because it wasn't turning on and her flash wasn't working either. after replacing it, it still didn't work.

any ideas on what the problem is and what can fix it?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

4 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

Erin, I would say it is either the logic board or software. I would try to backup the customers data and wipe it. If you still have issues after factory reset then you know it is likely the logic board.

P.S. This may go without being said but make sure the connector is seated well. It can be tricky sometimes.

Fue útil esta respuesta?

Sí No
Puntuación 1

2 comentarios:

Thanks, Jonathan I figured this but I didn't want to accepted it

- de

I hear ya. Been there. Good luck to ya.

- de

Agregar un comentario

Opciones
  1. If torch light works and if the camera doesn't show it's camera or software complaint
  2. If torch light also doesn't works it's camera ic complaint ( it will be next to touch ID ic, next to touch ID connector terminal
  3. RC technologies
  4. 628002
  5. Rosel Corera

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Opciones

Same issue: My 6s+ was plagued with the shaky tracking issue everyone else has. 

I bought a replacement and installed it. Now flash/led does not work and the camera is not recognized by any app. (Black screen). I reopened the phone and reinserted the OEM one… same issue. All connections are tight and everything is replaced as it should be.

I’ve reseated the ribbons 10 times (which each camera, old and new) and restored my phone to factory. No change. 


Did I damage the board? I’ve seen a ton of these questions asked but the answers are always “reboot the phone” “reseat the cables”. That’s not the answer here.

What’s my next move?

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Opciones

It's your camera ic is busted.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

Erin estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,647