Saltar al contenido principal

El Apple Watch Series 1 es una versión renovada del Apple Watch original anunciado el 7 de septiembre de 2016. La mayoría de las partes son las mismas que en el Series !.

Preguntas 123 Ver todo

Green snake charging error problem?

Hi, I have ten into this green snake charging problem on my apple watch and was wondering what to do to repair it or fix the problem?

I have tried unplugging it for 2 days then charging it, that didn't work. If I leave it charging for 2 days still same problem.

Could replacing the battery fix this?

Here is a video of the problem: https://www.dropbox.com/s/q6zg0h13i0shyh...

Thank you in advance!

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
2 comentarios

Anyone know what is going on or how to fix?

- de

This is a common issue I have been seeing online. No one knows whats going on or how to diagnose?

- de

Agregar un comentario

3 Respuestas

Solución Elegida

I fixed this a couple days ago and the problem was that I needed to replace the battery.

Works great now!

Fue útil esta respuesta?

Puntuación 1

1 comentario:

How much is it to replace a battery?

- de

Agregar un comentario
Respuesta Más Útil

Try holding both buttons for at least 10 seconds. If no luck, then try a different charger. Maybe more amps. Don’t charge from a computer just in case.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

I would like to know if you got it fixed ? And how you did it , i got myself a battery from ifixit and my watch is on the green snake for 2 days and I have left it on the charger since then nothing has changed try hard reset and nothing so please share how tu fix it

Fue útil esta respuesta?

Puntuación 0

4 comentarios:

It was the battery that was the issue.

- de

Did you have to replace the new battery again? I just got a battery from ifixit, and the same situation.

- de

I just installed an ifixit replacement battery and now get the green snake. Are the ifixit batteries faulty?

- de

I'm coming to the conclusion that the batteries sold by iFixit are too old sometimes (especially when they are for the early watch models). I'm having the same prob after installing a new battery. The snake screen should go away after a few minutes of charging but it doesn't.

Edit: After the third try to reset the watch, I finally got to the Apple logo and the battery (almost empty) now charges normally.

Edit 2: Nope, the charge progress vanishes all the time after a few minutes, Trying different outlets/USB sockets now…

Edit 3: After a while without any sign of proper charging, the watch restarts automatically and then starts charging normally. I guess, erratic behavior after installing a new battery which is almost empty is normal. Keep calm and wait patiently. I hope that my replacement battery is better than the old one (it was good to replace it in any case, as the old one just worked for 4 to 8 hours max, but after taking it out of the watch I figured that it had expanded.

- de

Agregar un comentario

Añadir tu respuesta

Cameron Saman estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 16,416