Saltar al contenido principal

Lanzado en Septiembre 16, 2016. Modelos 1660, 1778. Disponible en GSM o CDMA / 32, 128, o 256 GB / Oro Rosa, Oro, Plata, Negro Mate y Negro Brillante.

Preguntas 1130 Ver todo

iPhone 7 stuck in boot loop after screen replacement

I have an IPhone 7 stuck in boot loop after screen replacement.

I already tried to restore, didn't work.

Tested battery and the screen on a different phone and it works fine.

The only way I am able to boot up the by disconnecting the screen assembly completely and iTunes will recognize the phone and it seem to work fine.

How would you fix this issue?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 13

Comentarios:

No, I will update the thread if I do

por

Please do. I am having the same problem with 2 7's

por

I had the same issue with a 7...I was replacing the factory Apple screen with an aftermarket...started boot looping upon installing new screen...disconnected the screen and restored entering DFU mode...thought I fixed it...nope. Connected the screen (aftermarket) back and it started boot looping again. So frustrating.

por

Agregar un comentario

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

13 Respuestas

Try a new proximity sensor. I believe this can sometimes cause issues.

Fue útil esta respuesta?

Calificación 6

Comentarios:

Why is it so, can you explain this theory?

por

because apple..... it can be many different things, especially on the 7/7 plus. it can be audio ic, baseband cpu or psu/ home button/a bend in the phone or hard drop/pry damage during disassembly. ive seen resistors on nand lines break and cause it as well. theres so many things that can cause a bootloop.

por

This is often (but not always) the cause of an ip7 boot loop. This is because a broken prox flex often causes shorting issues or causes the phone to fail the bootup checks. Visual inspection with the naked eye is often not sufficient, even scoping it can fail to show damage on a damaged prox flex.

por

he is absolutely right,

por

Agregar un comentario

The main culprits for a boot loop on iPhone 7 after a screen replacement would normally be a damaged home button (or home button flex cable), (will eventually come on after 5-10 mins) or damaged front camera flex. If your really unlucky then it's possibly an ic as they are a known problem from dropping a iPhone 7.

Fue útil esta respuesta?

Calificación 3

Comentarios:

in my case it was faulty front camera!!

por

Agregar un comentario

Make sure you connected the camera cable right. Ill plugged it the wrong way.

Fue útil esta respuesta?

Calificación 2

Comentarios:

Excellent tip, I had done the same now it is all working as it should. Thank you!

por

Agregar un comentario

Often times when replacing a component in an iPhone, the user may install the screws in the wrong place. Since they are of different length, it may cause a short somewhere inside of the device. Make sure no metal pieces are where they shouldn't be, and try again. You can also try to boot the device temporarily without any of the screws you unscrewed to see if that is the issue.

Fue útil esta respuesta?

Calificación 1

Comentarios:

This typically causes a no start issue not a bootloop. Just dead phone that needs a skilled microsolder tech to repair.

por

Agregar un comentario

This is being called “Loop Disease”, and it is related to the Audio ic or the Baseband PMU. The solder joints beneath these IC’s are in a weak spot and will actually crack and/or separate from the board. Once this disconnects, the device cannot receive the data it needs upon boot up to actually boot fully. We have been repairing this issues like crazy at my shop here in the St. Louis area.

Fue útil esta respuesta?

Calificación 1

Comentarios:

What is the cost to repair? I have a 7 plus that is doing this. Half the time the home button works and then doesn't and the phone goes into loop mode. My email is smdeuman@yahoo.com. Can you send me a link to your business?

por

This absolutely can be another cause but the good practices in the industry are "You have a hardware problem until you can rule that out, then go looking for boardlevel issues) I'd try checking my prox flex (unplug or replace it) same with the homebutton. If that fails out and you're certain the battery is good then i'd go hunting boardlevel problems.

por

Agregar un comentario

Try to restore on iTunes.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

I just have run into the same thing after changing the screen and battery after a week. Cannot fix it. Please keep us updated. Thank you,

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

I replaced my first iPhone 7 screen and although it tested OK straight from the box when I came to the full install it was very slow to boot and then went into boot loop. The Apple symbol showed for about 10secs and then seemed to die but came on again repeatedly. I disassembled, including disconnecting the Home button, reconnected the digit and LCD flexes and again it tested fine. Reassembled everything but this time I more carefully reseated the Home button and this time all worked 100%.

Fue útil esta respuesta?

Calificación 0

Comentarios:

i've been running into this issue constantly. Not to mention that the i7 home button is horrible to connect properly

por

Agregar un comentario

It could be a faulty component, try disconnecting the camera.


I had this problem and was racking my brain for the last two months trying to think of what the problem could be; I finally figured it out yesterday when trying the screen on a different 7 (I was testing the other board to see if it was good) and it was in a bootloop as well. I decided to disconnect the camera and try it again; this time IT WORKED.


I connected it back to the original phone (without plugging in the camera), restored it and it worked as well.


Maybe you’ll get lucky and it will be something as simple and fixable as that, but it could also be any component on the board or on the screen assembly causing it.


Good Luck!

Fue útil esta respuesta?

Calificación 0

Comentarios:

I've had the same issue as you many times, apparently if I disconnect the home button you can plug the front camera back on and it will work again. The home button seems to be the culprit all this time.

por

So did you reconnect the camera after restoring?

por

Agregar un comentario

Boot loop or taking forever to boot after a screen replacement on iPhone 7 or newer can be caused by a defective or incorrectly installed proximity sensor. If the screen came with prox you can remove it and install with the one from the defective screen or send the screen back.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Here is my answer and this may help.

If you tried a new cam, and it still boots to logo then shuts off then does it over and over.. try another screen. Some screens are cheaply made and won’t register with the boot up process and will fail causing the boot loop. Try putting the old screen on and seeing if it’ll boot. If it does, your screen is bad and should be replaced with a higher quality display. I had one come in from a shop same issue and it ended up being a cheap quality replacement screen causing the boot loop.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

I had this boot loop issue, it turned out to be the battery connector not properly seated.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

I have found that the proximity sensor is the issue most of the time, if you start the phone but disconnect the top cable to the camera it will boot just fine. Apparently the glass where the camera is looking through is causing some sort of false signal.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Igor Chervoniak estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 49

Últimos 7 Días: 312

Últimos 30 Días: 1,393

Todo El Tiempo: 21,038