Repara tus cosas Comunidad Tienda

Modelo A1297 Unibody: principios de 2009, mediados de 2009, mediados de 2010, principios de 2011 y finales de 2011

Preguntas 544 Ver todo

Opciones

How to fix a broken battery connector pin?

I have a MacBook Pro 17” (mid-2009, Model A1297). I have successfully replaced the battery three times in the past.

Today, as I attempted to plug in a new battery, two of the thirteen pins in the battery connector on the main logic board got bent. Though I was extremely cautious and careful in trying to bend them back straight using tiny tweezers, they both broke off.

Block Image

Block Image

My options don’t appear good. As I see it, I could buy a new logic board (which appear to be about $430+ on Amazon); or I could go to someplace like MicroCenter and let them fix it for a $ amount I can only imagine.

Are there any other viable options? For example, is it possible to de-solder the old battery connector off the logic board and solder on a new one (assuming one could find a replacement connector)?

Please help with any ideas.

Thanks

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

Yes it's possible to solder a new one; you will most likely need to desolder one from a donor/dead board and move it across to yours. You can heat the opposite side of the logic board to remove this without melting the plastic connector. Not aware of a source for new ones, I just remove from donors if I ever need connectors like this

Fue útil esta respuesta?

Sí No
Puntuación 6

4 comentarios:

Your answer is most welcome, and gives me a bit of hope. You made my day — thanks.

Ted

- de

I'm in the same boat, and struggling to find a new socket, so now looking for a donor logic board to salvage the port from.

- de

Does anyone know what the part number for this component is as I have the same problem ?

- de

@stuart1 the connector is listed as a GS731301047E7H but it might be easier to buy an old/broken board and use that to harvest the connector from.

- de

Agregar un comentario

Opciones

That's wonderful, many thanks. They certainly seem hard to come by !

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

Ted estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 1,472